0

About EdgePro Slab Formwork System

Twice the strength of traditional material this 100% reusable aluminum solution will reduce project costs and impact on the environment. The EdgePro slab formwork system was developed to simplify the erection of slab formwork construction on granular bedding, existing excavated ground, concrete surfaces, suspended slabs and tilt panel fabrication. Read more...

FORMWORK SYSTEM FOR
CIVIL
FORMWORK SYSTEM FOR COMMERCIAL
FORMWORK SYSTEM FOR RESIDENTIAL
FORMWORK SYSTEM FOR INDUSTRIAL

What we do

Are you still doing formwork the old way? How many hours do you lose each year cutting, adjusting and assembling formwork, only to remove it to see a concrete finish that could be better?

Culvert Slabs

Commercial & Residential Concrete Slabs

Hi-Rise Suspended Slabs

Tilt Panels

THE BENEFITS

Reducing your project material and labor costs is only the beginning.
Edgepro minimises labour through a simple and efficient system for your formwork needs, requiring lower skilled labour, less time and is a fully re-usable system that eliminates waste.
Our development of the EdgePro System comes from years of experience in the formwork industry. We have carefully developed this system to ensure that the formwork process is as seamless as possible not mention the many other benefits that come with our system.

½ THE TIME TO INSTALL REDUCES LABOUR COSTS
1. Up to 50% labour saving per slab – fewer components & variables
2. Minimal over excavation required – only 500mm
1. Consistent smooth finish on all slab edges
2. No need for Concreter / labourer to edge the sides.
1. Marine strength aluminum guaranteed for 100+ pours
2. No cost or wastage with discarding timber after 6 – 8 pours
3. Easily cleaned for immediate re-use
1. Fewer people required to set up – Huge labour cost saving
2. Less risk of stress and strain injury
1. Faster to install
2. Minimum preparation, no on-site cutting, no special equipment
1. Negligible environmental impact, improve compliance
2. No timber offcuts, nails, form oil or form release agent
1. Double the space between bracing. Up to 2.4m
2. Less risk of bending, deforming during and after pours
1. No cost or wastage on items that can’t be re-used
2. Fewer LTI’s due to no nails, sharp edges, no cutting, fewer tools
3. Fewer trip hazards, a cleaner work site
1. Improves on site safety
2. Reduces risk of items being lost or misplaced
1. Fewer items to keep track of / lose on site
2. Faster to learn and master

Why Choose us

BEST QUALITY

INTEGRITY

STRATEGY

SAFETY

COMMUNITY

SUSTAINABILITY

What Our Clients Say

Productivity Bootcamp is an 8 week course that gets young people work ready, focusing on arming them with foundation skills to enter the Infrastructure industry. These include skills in formwork, steel, concrete and general groundworks. Productivity Bootcamp have been using the EdgePro System for the past 2 years.

Paul Breen Director, Productivity Bootcamp

Kaidawn Construction Australia is a privately owned and operated company that specialize in civil mining and construction. Kaidawn construction use the EdgePro formwork system for contracts involving culvert slabs due to the 50% cost saving in comparison to purchasing timber & plywood. Due to the faster turn-around with this type of formwork system, we were able to mobilise & demobilise much faster than expected.

Jason McGlinchy Foreman / Formworker, Kaidawn Construction

LK had a culvert slab to construct in Nowra NSW so instead of cutting timbers and plywood to construct, we hired the EdgePro 200mm formwork system at a fraction of the cost and smashed the slab out and off hired within 1 week. So easy, so efficient.

Stephen Shannahan Director / Formwork Foreman, LK Construction

Exterior Facades undertook a 21 story hi-rise development in Brisbane CBD and used the EdgePro Formwork System for all the edgeboards between columns and blade walls. Was so easy to jump forms from floor to floor and used fewer tradesmen due to simplicity.

Barry Fisher Director, Fisher Facades