BaseEdge 300
The fixed 90 degree polymer bracket for flat bases, suspended decks and concrete bases, edges to 300 mm.
Gallery
Brackets, fixings and stillages photographed on site and in the warehouse. Pick a division, tap any photo to see it full size.
Brackets
Five bracket profiles and the SlimEdge strongback, from a 300 mm step to a 1200 mm wall, photographed on the jobs they were set on and in the warehouse.
The fixed 90 degree polymer bracket for flat bases, suspended decks and concrete bases, edges to 300 mm.
The adjustable polymer bracket for edges to 600 mm. Stands to the board, anchors to whatever is underneath, winds plumb on the turnbuckle.
The heavy-duty steel bracket for walls, upstands and capping beams to 1200 mm. Two turnbuckle props off one base plate, paired with the SlimEdge strongback.
Forms slab rebates, nib walls and upstands from the slab edge in the primary pour. Hangs off the form, no ground support needed.
The steel rebate bracket for slab overhangs and wall rebates off the top of concrete and block walls, no framing underneath.
The 23 kg steel strongback that keeps a 1200 mm form straight. Built to clip to the MaxEdge 1200 props.
Fixings
What holds the bracket down: driven and screw-in anchors for soft ground and road base, M12 bolts and Z-Bar for concrete, deck and wall.
Hammer-driven steel anchor for soft ground, sand, crusher dust and fill. No power tools, pulls out clean, reusable.
High-tensile screw-in anchor for compact soils, clay and hard ground. Drives with an impact driver, countersunk head, no trip hazard.
M12 mechanical anchor for fixing the bracket straight to concrete, suspended slabs and existing structures. Pre-drill and drive.
An M12 concrete screw with the Z-Bar coupler built in. The fixing for suspended rebates and nib walls, fewer loose parts.
Steel locknut for 16 mm Z-Bar. Clamps and fine-tunes the rebate bracket on the Z-Bar Concrete Bolt.
Stillages
Galvanised stillages and the stainless Uni Basket that move a set of brackets between pours and keep the fixings with them.
Galvanised and powdercoated stillages that hold 50 or 80 brackets. Forklift compatible, stack three high, the set moves between pours as one lift.
Stainless basket for the anchors, bolts and locknuts. Hooks on the stillage, lifts off when the crew needs it.
For the next pour
Brackets, fixings and storage, priced ex GST, shipped from South East Queensland. Order online in minutes, no phone calls required.
For major projects
Volume pricing, NET 30 trade accounts and project support for contractors. Tell us about the project and your numbers are back within one business day.